Add entire contents to fuel tank. Treats up to about 16 gallons. Step #2 Intake Deposit Clean-up (Red Bottle) 1) With the engine off, remove a vacuum hose from the PCV Valve, brake power booster or highest convenient ported vacuum hose from the intake manifold (make sure it does not lead through any plastic tees or check valves) and connect the FI01002 (reusable) feeder kit to the hose making sure the brass valve on the feeder kit is closed. Use CAUTION to make sure the feeder kit hose is clear of the radiator fan and exhaust manifold. 2) Start engine let idle for 3 to 5 min. Then Adjust the engine speed to 1200 - 1450 RPM , or you can leave all vehicles at idle, it takes a little longer. DO NOT RUSH, THIS STEP SHOULD TAKE 9 TO 12 MINUTES ! 3) Connect the #FI01002 (Reusable feeder to hood or under hood latch to support I.V. Bottle) 4) Close the brass valve on Part #FI01002 (Reusable Feeder)and pour entire contents of STAGE 2 (Red Bottle) intake cleaner into the bottle of the part #FI01002 feeder kit bottle. Slowly open the brass valve on the feeder to allow the STAGE 2 cleaner to flow slowly through the vacuum line. The engine may shake during this process. If the engine should stall, close the brass feeder valve, restart the engine and continue. 5) When the entire contents of the feeder kit or product bottle have been pulled into the engine. Shut off the engine, remove the feeder kit or product bottle, reconnect the vacuum hose and return the engine idle to normal. Step #3 Crankcase System Clean-up (Black Bottle) Simply add to crankcase (after oil change, if applies). Leave in motor. Copyright 2000-2010, H.D.I. Management Inc. Nevada, USA all rights reserved, All logos, Trademarks, & Copyrights are property of their respective owners. |