B G Products / 44K - Intake - Throttle Body Spray - CF5

BG 44 K

STAGE 1 (BG 44K) quickly and effectively cleans the entire fuel system, including injectors, intake valves, ports and combustion chamber. Because it provides efficient removal of upper engine deposits, BG 44K reduces problems caused by deposit build-up such as engine surge, stalling, stumble, hesitation and power loss. It is an excellent aid in tuning an enginesince BG 44K quickly restores engine performance and improves driveability. BG 44K added to diesel fuel will provide quick clean-up of coked fuel injectors. It is compatible with all fuel system materials and common fuel additives. Contains no alcohol. DIRECTIONS: Add one 11 oz. can BG 44K to fuel tank at fill-up.

BG Intake Cleaner with Feeder

BG Intake Manifold & Combustion Chamber Cleaner

1) While the engine is still running, remove a vacuum hose from the PCV Valve, brake power booster or highest convenient vacuum hose from the intake manifold (make sure it does not lead through any plastic tees or check valves) and connect the FI01002 feeder kit to the hose making sure the brass valve on the feeder kit is closed. Use CAUTION to make sure the feeder kit hose is clear of the radiator fan and exhaust manifold.

2) Adjust the engine speed to 1200 - 1450 RPM except turbo engines which remain at idle, OR you can leave all vehicles at idle, it takes a little longer. DO NOT RUSH, THIS STEP SHOULD TAKE 6 TO 9 MINUTES !

3) Connect the #FI01002 feeder bottle to hood or under hood latch to support I.V. Bottle.

4) Close the brass valve on Part #FI01002 Reusable Feeder ,and pour entire contents of Intake cleaner into the bottle of the part #FI01002 feeder kit bottle. Slowly open the brass valve on the feeder to allow the Intake Cleaner to flow slowly through the vacuum line. The engine may shake during this process. If the engine should stall, close the brass feeder valve, restart the engine and continue.

5) When the entire contents of the feeder kit or product bottle have been pulled into the engine. Shut off the engine, remove the feeder kit or product bottle, reconnect the vacuum hose and return the engine idle to normal.

BG Products 3 Part

STAGE 3 (Throttle Body & Carburetor Cleaner)is only required on engines equipped with throttle body fuel injection or a carburetor and will not harm them. (NOTE: DO NOT USE ORDINARY CARBURETOR CLEANER ON NEWER TEFLON-COATED THROTTLE BODY MODELS AS IT IS CAUSTIC AND CAN DAMAGE THEM)

1) With the engine off, disconnect the air intake boot from the throttle body or remove the air cleaner cover from the carburetor. Spray about half of the contents of the BG Throttle Body Spray can into the throat while working the butterfly valve back and forth. Start the engine and spray the remainder of the can contents into the throttle body or carburetor using short spray bursts. Reconnect the air intake boot or air cleaner and let the engine idle for at least five minutes or drive the car at once.

BG Intake Manifold & Combustion Chamber Cleaner

1) While the engine is still running, remove a vacuum hose from the PCV Valve, brake power booster or highest convenient vacuum hose from the intake manifold (make sure it does not lead through any plastic tees or check valves) and connect the FI01002 feeder kit to the hose making sure the brass valve on the feeder kit is closed. Use CAUTION to make sure the feeder kit hose is clear of the radiator fan and exhaust manifold.

2) Adjust the engine speed to 1200 - 1450 RPM except turbo engines which remain at idle, OR you can leave all vehicles at idle, it takes a little longer. DO NOT RUSH, THIS STEP SHOULD TAKE 6 TO 9 MINUTES !

3) Connect the #FI01002 feeder bottle to hood or under hood latch to support I.V. Bottle.

4) Close the brass valve on Part #FI01002 Reusable Feeder ,and pour entire contents of Intake cleaner into the bottle of the part #FI01002 feeder kit bottle. Slowly open the brass valve on the feeder to allow the Intake Cleaner to flow slowly through the vacuum line. The engine may shake during this process. If the engine should stall, close the brass feeder valve, restart the engine and continue.

5) When the entire contents of the feeder kit or product bottle have been pulled into the engine. Shut off the engine, remove the feeder kit or product bottle, reconnect the vacuum hose and return the engine idle to normal.

BG CF5 gasoline supplement is a unique, high-tech formulation designed to provide deposit control through the life of the engine. Directions: Add one 11 ounce (325 ml) can BG CF5 to the fuel tankat each oil change interval. For best results add to full fuel tank or fill tank immediately after use

Copyright 2000-2010, H.D.I. Management Inc. Nevada, USA all rights reserved, All logos, Trademarks, & Copyrights are property of their respective owners.

BG ISC / BG211

1) While the engine is still running, remove a vacuum hose from the PCV Valve, brake power booster or highest convenient vacuum hose from the intake manifold (make sure it does not lead through any plastic tees or check valves) and connect the FI01002 feeder kit to the hose making sure the brass valve on the feeder kit is closed. Use CAUTION to make sure the feeder kit hose is clear of the radiator fan and exhaust manifold.

2) Adjust the engine speed to 1200 - 1450 RPM except turbo engines which remain at idle, OR you can leave all vehicles at idle, it takes a little longer. DO NOT RUSH, THIS STEP SHOULD TAKE 6 TO 9 MINUTES !

3) Connect the #FI01002 Reusable feeder to hood or under hood latch to support I.V. Bottle feeder, attatch product bottle to hood)

4) Close the brass valve on Part #FI01002 Reusable Feeder and pour entire contents of ISC cleaner into the bottle of the part #FI01002 feeder kit bottle. Slowly open the brass valve on the feeder to allow the ISC cleaner to flow slowly through the vacuum line. The engine may shake during this process. If the engine should stall, close the brass feeder valve, restart the engine and continue.

5) When the entire contents of the feeder kit or product bottle have been pulled into the engine. Shut off the engine, remove the feeder kit or product bottle, reconnect the vacuum hose and return the engine idle to normal.

MOA BG110

DIRECTIONS FOR USE: For continuous engine protection, add one 11 oz. (325 mL) can of BG Advanced Formula MOA to 4 or 5 quarts (4 to 5 Liters) of engine oil at each oil change. Add to crankcase any time the oil level is low to fortify engine oil between changes. Do not overfill crankcase.

CF5 Carbon Fighter

DIRECTIONS FOR USE: Add one 11 oz. can CF5 Carbon Fighter to fuel tank at each oil change interval. For best results add to full fuel tank or fill tank immediately after use.

Copyright 2000-2010, H.D.I. Management Inc. Nevada, USA all rights reserved, All logos, Trademarks, & Copyrights are property of their respective owners.

BG Frigi-Fresh Spray

BG FRIGI-FRESH has been formulated to quickly and effectively remove foul, musty odors from automobile air conditioning systems. It will freshen foul-smelling systems by killing odor-producing organisms. Powerfull deordorizers in BG FRIGI-FRESH keep the automoble interior smelling fresh and clean.

DIRECTIONS FOR USE:

It is a violation of Ferderal Law to use this product in a manner inconsistent with its labeling.

With engine running and air conditioner on maximum speed and cooling, spray BG FRIGI-FRESH into the air intake vent. Hold can 8 to 12 inches (20-30 cm) above the vent while spraying four to six seconds. Make sure spray tip is pointed directly at the intake vent before spraying. The Recirculating system will pick up the product and the entire system will deodorized in seconds. Shut off engine and air conditioner after applying the product.

NOTE: BG FRIGI-FRESH may be applied directly to ashtrays, food spills, ect... to eliminate odors from those sources. Re-apply BG FRIGI-FRESH as needed.

IMPORTANT: Read Precautionary Statement on container prior to use

Copyright 2000-2010, H.D.I. Managemet Inc. Nevada, USA All Rights Reserved, All Logos, Trademarks & Copyrights are property of their respective owners.